• One For allIndustrial Automation , Instrumentation & Valve


Z109REG2 is an advanced universal converter able to manage all analog signals (mA, V, PT100, Pt1000, Pt500, Ni100, TCs, Ohm) and convert / isolate it into mA/V standard signals. The device can be configured through dip-switches, PC software or handheld device. A digital contact is available as ALARM or STROBE (multiplexing). It can be requested with low or high power supply. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.

Technical Specification

Electrical Specifications
Power supply 10..40 Vdc / 19..28 Vac / 50-60 Hz
Power consumption 2,5 W
Isolation 1.500 Vac (3 way)
Power transducers Yes
Status Indicators Power supply, error, data transmission, data reception, input status
Protection Degree IP20

Thermomechanical Specifications
Operating Temperature -10..+60 °C
Dimension (W x H x D) 17.5 x 100 x 112 mm
Accuracy 0,1%
Response time 35 ms (11 bit)..140 ms (16 bit)
Setting Dip- switches
EASY_Z109 (PC software)
Test-3 (hand held calibrator)
Mounting 35 mm DIN rail guide

Channel Numbers 1
Voltage (mV, V)
 Bipolar from 75 mV to 20 V
Resolution 15 bit + sign
Current Bipolar up to 20 mA
Resolution 1 μA)
Rtd Pt100, Pt500, Pt1000, Ni100, KTY81,KTY84, NTC
Measure 3, 4 wires
 Range: -200..600 °C
Resolution 0,1°C
Potentiometer 500 Ω ..10 kΩ
Rheostat 500 Ω..25 kΩ
Strobe Alternative to the relay output
Thermocouple Type J, K, R, S, T, E, B, N Resolution 2,5 μV

Channel Numbers 1
Voltage (4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.000 Ω
Current 2 scales: 0/4..20 mA (active/passive)
 Max load resistance: 600 Ω
Relay Alternative to the strobe NC / NA in case of alarm

Norms EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN
50140/141; EN 61010-1
Approval CE, UL-CSA

order codes
Code Description
Z109REG2 High performance universal converter, Power supply 10..40 Vdc / 19..28 Vac
Z109REG2-H High performance universal converter, Power supply 85..265 Vac/Vdc